Инструкция для ASUS sl1000
A
PPLICATION
N
OTES
–
C
REATING AN
IKE IP
SEC
T
UNNEL
B
ETWEEN AN
I
NTERNET
S
ECURITY
R
OUTER AND A
W
INDOWS
2000/XP PC
Copyright 2003, ASUSTeK Computer, Inc.
Page
29
menu and then click the
“Outbound ACL” submenu to access the Outbound ACL configuration page. Enter the
outbound ACL settings in the firewall Outbound ACL configuration page as shown in Figure 3.3. Click the
“Add”
button to create the new rule when done with the configuration. The newly created ACL rule will be displayed in
the Outbound Access Control List table as shown in Figure 3.4.
the Outbound Access Control List table as shown in Figure 3.4.
Figure 3.3. The Outbound ACL Rule Settings for the VPN Policy
Figure 3.4. Outbound ACL Summary
3.3.3 Configure an Inbound ACL Rule for the VPN Policy
This step is needed only when firewall is enabled. To accept the inbound traffic originated from the remote secure
group, an inbound ACL rule is required; otherwise, the inbound traffic will be blocked by the firewall. Click the
“Firewall” menu and then click the “Inbound ACL” submenu to access the Inbound ACL configuration page.
Enter the inbound ACL settings in the firewall Inbound ACL configuration page as shown in Figure 3.5. Click the
“Add” button to create the new rule when done with the configuration. The newly created ACL rule will be
displayed in the Inbound Access Control List table as shown in Figure 3.6.
group, an inbound ACL rule is required; otherwise, the inbound traffic will be blocked by the firewall. Click the
“Firewall” menu and then click the “Inbound ACL” submenu to access the Inbound ACL configuration page.
Enter the inbound ACL settings in the firewall Inbound ACL configuration page as shown in Figure 3.5. Click the
“Add” button to create the new rule when done with the configuration. The newly created ACL rule will be
displayed in the Inbound Access Control List table as shown in Figure 3.6.
Make sure
“Enable” is selected for VPN.
New outbound ACL