Справочник Пользователя для ASUS rx3041h

89 

2. Select 

“Add New” from the “ID” drop-down list. 

3.  Set desired action (Allow or Deny) from the “Action” drop-down list. 

4.  Select Outbound or Inbound from the rule Type drop-down list. 

5.  Select a group from the Group drop-down list. 

6.  Make changes to any or all of the following fields: source/destination IP, source/destination port, 

protocol, NAT, time ranges, application filtering, and log. Please see Table 9.1 for explanation of 
these fields. Figure 9.9 illustrates how to create a rule to deny outbound HTTP traffic for a host w/ 
IP address 192.168.1.15. 

 

7.  Assign a priority for this rule by selecting a number from the “Move to” drop-down list. Note that 

the number indicates the priority of the rule with 1 being the highest. Higher priority rules will be 
examined prior to the lower priority rules by the firewall. 

8.  Click on the 

 button to create the new ACL rule. The new ACL rule will then be displayed 

in the group ACL table at the bottom half of the Group ACL configuration page. 

 

To modify a group ACL rule, follow the instructions below: 

1.  Open the Time Range configuration page by clicking the Firewall 

ΠRemote Access Î Group 

ACL menu. Manually  

2.  Click on the 

 icon of the rule to be modified in the group ACL list table or select the rule 

number from the “ID” drop-down list. 

3.  Make desired changes to any or all of the following fields: action, rule type, group, 

source/destination IP, source/destination port, protocol, NAT, time ranges, application filtering, 
and log. Please see Table 9.1 and Table 10.2 for explanation of these fields. 

4.  Click on the 

 button to modify this ACL rule. The new settings for this ACL rule will then 

be displayed in the group ACL list table at the bottom half of the Group ACL configuration page.