Справочник Пользователя для ASUS rx3041h

 

4.  When the co

p up. Click on the 

unt down timer elapses, a dialog window, as shown below, will po

 button to reconnect to the router. 

 

rget your password or you 

n 

s the reset button (first time). 

the Alarm 

e

tion: 

g the System 

2. 

Sometimes, you may find that you have no way to access your router, e.g. you fo
forget the LAN IP address of your router. The only way out in this scenario is to reset the system configuratio
to the factory settings by following the procedures below using the reset button located on the rear panel: 

1.  Power off the router and wait for at least 5 seconds. 

2.  Power on the router and wait around 5 seconds, pres

3.  After the ALARM LED flashes once, press the reset button again. You will then see 

LED flash twice in about 5 seconds. This indicates that the RX3041H is about to revert to the 
factory default settings. If you change your mind, you may press the reset button again or turn the 
power off to cancel the action. If the system configuration failed to reset to the factory settings, 
repeat this procedure from step 1.  

Follow th  steps below to backup system configura

1.  Open the Backup configuration page by clickin

Management 

ΠConfiguration Î Backup menu. 

Click 

on 

 button to backup the system configuration. 

 

 

tion: 

g the System 

Follow the steps below to backup system configura

1.  Open the Restore configuration page by clickin

Management 

ΠConfiguration Î 

menu.