Справочник Пользователя для ASUS rx3041h

11 

3.2  Part 2 — Configuring Your Computers 

Part 2 of the Quick Start Guide provides instructions for configuring the Internet settings on your computers to 
work with the RX3041H.  

By default, the RX3041H automatically assigns all required Internet settings to your PCs. You need only to 
configure the PCs to accept the information when it is assigned.  

In some cases, you may want to configure network settings 
manually to some or all of your computers rather than allow the 
RX3041H to do so. See “Assigning static IP addresses to your PCs” 
in page 13 for instructions. 

 

 If you have connected your PC via Ethernet to the RX3041H, follow the instructions that correspond to 

the operating system installed on your PC.  

 

1.  In the Windows task bar, click the <Start> button, and then click Control Panel. 

2.  Double-click the Network Connections icon. 

3.  In the LAN or High-Speed Internet window, right-click on icon corresponding to your network 

interface card (NIC) and select Properties. (Often this icon is labeled Local Area Connection). 

The Local Area Connection dialog box displays with a list of currently installed network items. 

4.  Ensure that the check box to the left of the item labeled Internet Protocol TCP/IP is checked, and 

click <Properties> button. 

5.  In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an 

IP address automatically. Also click the radio button labeled Obtain DNS server address 
automatically. 

6. Click 

<OK> button twice to confirm your changes, and close the Control Panel. 

First, check for the IP protocol and, if necessary, install it: 

1.  In the Windows task bar, click the <Start> button, point to Settings, and then click Control Panel. 

2. Double-click 

the 

Network and Dial-up Connections icon. 

3.  In the Network and Dial-up Connections window, right-click the Local Area Connection icon, 

and then select Properties. 

The Local Area Connection Properties dialog box displays a list of currently installed network 
components. If the list includes Internet Protocol (TCP/IP), then the protocol has already been 
enabled. Skip to step 10. 

4.  If Internet Protocol (TCP/IP) does not display as an installed component, click <Install> button. 

5.  In the Select Network Component Type dialog box, select Protocol, and then click <Add> button. 

6. Select 

Internet Protocol (TCP/IP) in the Network Protocols list, and then click <OK> button. 

You may be prompted to install files from your Windows 2000 installation CD or other media. Follow 
the instructions to install the files.