Справочник Пользователя для ASUS wl-300

The computer running the SpaceLink Access Point Manager must be on
the same IP subnet as the SpaceLink Access Point in order to successfully
find SpaceLink Access Points.

1.  When you open the SpaceLink Ac-

cess Point Manager, it automatically
searches for SpaceLink Access
Points on the same subnet. You will
not be able to see or configure set-
tings until the IP address is changed
so that the subnet matches that of
your computer running the
SpaceLink Access Point Manager.

2. Click the IP Config tab and change

the IP address and subnet mask.
By default, the SpaceLink Access
Point Manager shows correct set-
tings of SpaceLink Access Points
on the same subnet. For example,
if your SpaceLink Access Point
Manager software is running on IP
address 192.168.8.8 subnet mask
255.255.255.0, you can enter IP ad-
dress 192.168.8.9 (assuming that
it is not already assigned to another
network device), subnet mask
255.255.255.0. Usually, you should
use the same subnet mask as your
computer.