Листовка для APart MA200
APart MA200
MIXING AMPLIFIER
With the MA200 mixing amplifier series, the Apart engineering team has created some
unique, original and above all, complete electronics. Never before has a mixer amplifier
had all the features to meet a contractors demand for nearly every application.
unique, original and above all, complete electronics. Never before has a mixer amplifier
had all the features to meet a contractors demand for nearly every application.
The most important features:
• 200 watt 100 Volt mixing amplifier
• 4 mic inputs (phantom via internal switch)
• Mic inputs have integrated speech filters and are high-class transistor balanced
• 4 Line inputs
• 4 Loudspeaker output zones can be selected (switch on/off) and have LED indication.
Zone 4: selection of “Music only”, “microphone only” or both music and microphone.
• Bass-treble tone control
• Master volume control
• 3-Level priority system: 1. Emergency input: directly to the power amplifier (vol adjustable)
• 200 watt 100 Volt mixing amplifier
• 4 mic inputs (phantom via internal switch)
• Mic inputs have integrated speech filters and are high-class transistor balanced
• 4 Line inputs
• 4 Loudspeaker output zones can be selected (switch on/off) and have LED indication.
Zone 4: selection of “Music only”, “microphone only” or both music and microphone.
• Bass-treble tone control
• Master volume control
• 3-Level priority system: 1. Emergency input: directly to the power amplifier (vol adjustable)
2. VOX Mute: Voice activated mute (adjustable) on MIC input 1
mutes all other inputs
3. Contact closure mutes all line inputs
mutes all other inputs
3. Contact closure mutes all line inputs
• LED indication on front pannel when line inputs are muted
• 24V ouput power is activated via contact closure. Can be used to switch the 24V priority
relays of volume controls.
• Integrated 2-tone chime has an adjustable volume and is activated by contact closure
• Build-in dynamic limiter (-3dB)
• Record output via RCA
• PRE AMP OUT - AMP IN makes it possible to insert an external signal processor or to add
extra power amplifiers
• 19” brackets are included
• 24V ouput power is activated via contact closure. Can be used to switch the 24V priority
relays of volume controls.
• Integrated 2-tone chime has an adjustable volume and is activated by contact closure
• Build-in dynamic limiter (-3dB)
• Record output via RCA
• PRE AMP OUT - AMP IN makes it possible to insert an external signal processor or to add
extra power amplifiers
• 19” brackets are included
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM