Справочник Пользователя для Allen-Bradley devicenet modules in logix5000 control systems

Publication DNET-UM004A-EN-P - March 2004

3-4        Connect a Computer to the System

Logix 5550/CompactLogix.

COM port that you are using.

Auto-Configure

5. Wait for the auto-configuration to finish.

1. Choose the following:

Important: Make sure no other driver is configured for the 
COM port to which you connect the serial cable.

Enter the IP address of the controller or communication 
module.

Use the address that the software picks.

Or assign a specific address:

A. Clear this check box.

B. Enter the address that you to use.