Справочник Пользователя для Allen-Bradley devicenet modules in logix5000 control systems
Publication DNET-UM004A-EN-P - March 2004
Connect Each Device to the Network 5-5
ControlNet to DeviceNet Linking Device 1788-CN2DN
DriveLogix and FlexLogix Scanner 1788-DNBO
1. Set the DeviceNet address.
3. Connect the device to the DeviceNet and ControlNet networks.
4. Turn on power to the device.
5. Check the DeviceNet network status light.
If:
Then the:
green (flashing or solid)
address is OK
solid red
address and/or baud rate conflict with another device
2
4
6
8
0
2
4
6
8
0
MSD
LSD
(Switches shown set to node 14)
2
4
6
0
2
4
6
8
0
MSD
LSD
(Switches shown set to node 26)
PGM
Do not use the PGM area.
2. Set the ControlNet address.
1. To change the address, press the button above or below a number.
2. Connect the device to the network.
3. Turn on power to the device.
4. Check the NS (network status) light.
If:
Then the:
green (flashing or solid)
address is OK
solid red
address and/or baud rate conflict with another device
31288-M
N