Справочник Пользователя для Akai cts14mtd

E- 6

Connect your TV aerial to the aerial input socket located on the back of the TV.
Push the Main Power Switch, Power Indicator will be illuminated.  After a few seconds the TV screen will light up. Should white
dots appear on the screen the TV will require tuning into the available TV stations in your area.

Pre-setting the TV stations into the Memory
(Note: Preset tuning can only be carried out in TV Mode)

1. Press MENU button to see main MENU.

2. Press the VOL button  /  to select TUNE mode as shown in figure 1.

AUTO SEARCH
1. Press the CH button    to select the AUTO SEARCH (auto memory store) mode

as shown in figure 2.

2.  Press the VOL button 

   

to start the automatic scanning processes, the on air

stations will automatic store into memory as shown in figure 3.

•

When scanning is completed, the set will tune to lowest program and show
lowest program number on the screen.

•

If want to stop auto search function, press the MENU button.

SEARCH  (manual)
1. Press the MENU button to see main MENU.
2. Press the VOL 

/

  to select TUNE MODE.

3. Press the CH    Button to select the SEARCH mode and  press the VOL 

/

  to

start the station search. The station will stop when the station is tuned in.

4. Press the CH   to select the desired COLOUR system, SOUND system, PROGRAM position, and press the VOL 

/

  to

select.

5. If the station is not clear, to select the FINE TUNE and press VOL 

/

  to tune the station untill the picture is clear.

6. Press the CH    to select the STORE and press the VOL 

/

  to  store the data into memory.

PICTURE
1. Press the MENU button to see main MENU.
2. Press the VOL button  /   select  the PICTURE mode .
3. Press the CH button  /   to select the BRIGHTNESS / COLOUR / CONTRAST /

SHARPNESS as show  in figure 4.

4. Press the VOL button  /   to  adjust the level of currently selected item, The steps

can be adjust from 0 ~ 63 .

TIMER
1. The TV can switch ON/OFF the power automatically by the following procedure.
2. Press the MENU button to main MENU.
3. Press the VOL button   to select the TIMER mode, press the CH button   to adjust

the clock time as shown in figure 5 .

4. Press the VOL button  /   to adjust the hour time 1 7 : _ _ ;

Press the CH button   to select  the minute 1 7 : 0 0 ;
Press the VOL  /  to adjust the minute time 1 7 : 3 0 .

5. Continue press the CH   and VOL button  /  to set the

ON TIME _ _ : _ _ .  ON PROG.   OFF TIME _ _ : _ _ .

•

To make the timer function effective, the TV must set to standby mode, after process is completed.

FIG .2

$

#

AUTO SEARCH

  

          BRIGHTNESS  30

%

FIG .4

CLOCK  _ _ : _ _

$

FIG .5

#

PICTURE TIMER   SETUP  TUNE

FIG .1

VHF - L

STOP    MENU

FIG .3