Справочник Пользователя для ati multimedia center 9.0

DVD     121

     

S/PDIF (Sony/Philips Digital Interface) allows transfer of 
digital audio from one location to another without analog 
conversion; it is the standard format for exchanging digital 
audio signals between consumer audio components. 
Connections can be coaxial or optical. 

You can connect your ALL-IN-WONDER’s audio output 
directly to an S/PDIF amplifier or speaker set; for details, see 
the Installation and setup User’s Guide that came with your 
ALL-IN-WONDER card. 

• S/PDIF is not compatible with analog audio. You must have a 

Dolby Digital 5.1 channel A/V receiver; enabling S/PDIF 
with an analog receiver will not provide audio. 

• If you are using regular speakers on your PC, but do not hear 

audio while playing a DVD, ensure that the Enable S/PDIF 
output box is not checked. 

• High-quality audio cables can be used for short lengths; good 

75-ohm cable and good 75-ohm connectors can provide 
lengths up to 25 feet.

     

When you play a DVD in full screen mode, the Advanced 
Aspect Ratio settings page lets you control the width-to-height 
ratio of video displayed in DVD.  This feature is useful for fine-
tuning your display for wide-screen and projection TVs.  Full-
screen, letterbox, and standard 4:3 aspect ratios are available.

Click the Setup button in the DVD control panel, click 
the Advanced Aspect Ratio tab, and then click Enable 

Advanced Aspect Ratio, and select the aspect ratio.

• You can enter values in the Dynamic Aspect Ratio dialog 

box, or drag the window margins using your mouse.