Справочник Пользователя для 3M repulpable splicing tapes for newspring brochure
A Missed Splice Isn’t Just
Bad News. It’s No News
Bad News. It’s No News
Tape Is Totally Repulpable
It’s Easy To Apply
Stock roll is moved into
position, with leading edge
flush against underlying
paper and squared evenly
at the bottom. The two
bottom points of the “W”
pattern are marked, with
a tab placed at both sides
of each point.
position, with leading edge
flush against underlying
paper and squared evenly
at the bottom. The two
bottom points of the “W”
pattern are marked, with
a tab placed at both sides
of each point.
3M
™
Repulpable Paster Tape
913 is positioned to form
the leading edge of the “W”
pattern. Additional strips are
used to complete the first
point. Then the second point
of the “W” pattern is created
in the same manner.
the leading edge of the “W”
pattern. Additional strips are
used to complete the first
point. Then the second point
of the “W” pattern is created
in the same manner.
Remove the liner from the
tape, without removing the
liner on the area of the web
that will come into contact
with the drive belt. This
section of liner remains
on throughout the paster
sequence so that tape does
not stick to the drive belt.
tape, without removing the
liner on the area of the web
that will come into contact
with the drive belt. This
section of liner remains
on throughout the paster
sequence so that tape does
not stick to the drive belt.
Tape Eliminates Disadvantages Of Glue
Tape Can
Prevent Costly
Missed Splices
Prevent Costly
Missed Splices
A missed splice on a web
press can be costly in terms
of downtime, labor, and paper.
3M
press can be costly in terms
of downtime, labor, and paper.
3M
™
Repulpable Paster Tape
913 is designed for outstanding
performance in combination
with 3M
performance in combination
with 3M
™
Repulpable Nose
Tab 9030. With each 3M
precut nose tab a uniform
three inches in length, it’s easy
to properly position them. In
addition, we offer 3M
precut nose tab a uniform
three inches in length, it’s easy
to properly position them. In
addition, we offer 3M
™
Hand
Applicator PA1-B to help
ensure a consistent bond.
ensure a consistent bond.
Tape Performance
Is Not Dependent
On Temperature
Or Humidity
Is Not Dependent
On Temperature
Or Humidity
Whether you store your paper
or take it directly from rail to
press, you can apply 3M
or take it directly from rail to
press, you can apply 3M
™
Repulpable Paster Tape 913
and 3M
and 3M
™
Repulpable Nose Tab
9030 with confidence. The
strength of its bond holds up
even when temperature and
humidity undergo dramatic
changes. This reliability
under varying conditions
can help reduce paper storage
costs. More importantly, it
helps avoid failed splices,
costly downtime and missed
deadlines.
strength of its bond holds up
even when temperature and
humidity undergo dramatic
changes. This reliability
under varying conditions
can help reduce paper storage
costs. More importantly, it
helps avoid failed splices,
costly downtime and missed
deadlines.
Tape Holds
Its Splice At
Temperatures
Reaching 400°F
Its Splice At
Temperatures
Reaching 400°F
That’s how hot it can get
in the web press dryer.
And 3M technology gives
this tape the ability to take
the heat where many other
typical tapes and glues fail.
in the web press dryer.
And 3M technology gives
this tape the ability to take
the heat where many other
typical tapes and glues fail.
1.
2.
4.
The Presses Roll On
* Repulpability judged according to TAPPI UM-213, Procedure A.
Press-ready “W”
and “V” pattern.
and “V” pattern.
Working from the center
and the sides of the “W,”
the paper is torn back where
it meets the edge of the tape.
After the paper is torn, the
tape must be on the leading
edge of the pattern, not
recessed back.
and the sides of the “W,”
the paper is torn back where
it meets the edge of the tape.
After the paper is torn, the
tape must be on the leading
edge of the pattern, not
recessed back.
3.
The 3M
™
Repulpable Paster Tape
and 3M
™
Repulpable Nose Tab
combination offers faster setup time
than many typical glues because you
don’t have to adjust the mix or wait
for glue to dry. Simply apply the tape
than many typical glues because you
don’t have to adjust the mix or wait
for glue to dry. Simply apply the tape
and remove the easy-release liner,
and the tape is ready whenever you
are — always with consistent tack
and aggressive “wet grab.” And no
one in the press-room is going to
miss the messiness of glue.
and the tape is ready whenever you
are — always with consistent tack
and aggressive “wet grab.” And no
one in the press-room is going to
miss the messiness of glue.
That’s why 3M
™
Repulpable Paster
Tape 913 and 3M
™
Repulpable
Nose Tab 9030 are good news.
When it comes to getting the news
out on time day after day, no other
When it comes to getting the news
out on time day after day, no other
splicing alternative offers the
reliability of 3M
reliability of 3M
™
Repulpable
Splicing Tapes for newsprint.
Their unique features continue
to make headlines.
Their unique features continue
to make headlines.
With 3M
™
Repulpable
Paster Tape 913 and
3M
3M
™
Repulpable Nose
Tab 9030, waste, scrap,
and liners are 100%
repulpable
and liners are 100%
repulpable
*
. The ability
of our tape combination
to eliminate missed
splices means that
it can help reduce
the amount of waste.
to eliminate missed
splices means that
it can help reduce
the amount of waste.