Справочник Пользователя для Archos dvr station gen 5
DVR Station Gen 5
20
User ManUal - version 3
Be careful that the audio source is supplying a line-level and not an amplified signal (turning down the volume
of the player will work if you are using the headphone out signal of your audio device). A signal that is amplified
too much will result in a terribly distorted recording.
of the player will work if you are using the headphone out signal of your audio device). A signal that is amplified
too much will result in a terribly distorted recording.
4.2. reCOrding VideO manually
With the DVR Station, you will be able to record video from most any
standard video source.
standard video source.
recorDing ProceDUre
Your ARCHOS needs to be connected to the DVR Station. Also connect your video
source’s outputs to the DVR Station’s inputs.
source’s outputs to the DVR Station’s inputs.
In the Home screen, select the “
Recorder
” icon and use the tabs (
button) to ac-
cess the “
Video Recorder
” mode.
This screen will allow you to adjust the recording sound gain (left/right arrows) as
well as configure other recording parameters
well as configure other recording parameters
(see next section).
You can now tell the ARCHOS to start recording from the video source (“
REC
” yellow
icon, “
Start Recording
” menu item, or
OK
button). You can pause and resume your
recording at any time.
Close the screen
to stop and save the recording*.
* All video recordings made by your ARCHOS device are saved in the
Video/(Rec)
folder. If you wish to keep
them in a different location, you can use the “
Move
” function of the ARCHOS file browser after recording.
“ViDeo recorDer” settings
To access the “
Video recorder
” settings screen, select the “
Settings
” menu item:
“Auto Stop Rec”:
the duration of time after which the ARCHOS will automatically stop record-
ing. If you disable this function, the recording will continue until you press or until the entire
hard drive fills up.
hard drive fills up.
“Rename”:
allows you to define the filename before the recording begins, using the keyboard.
“Source”:
you can choose which video input (“
Auto
”/“
Composite
”/“
S-Video
”) you want the
ARCHOS to use. Normally, with a good video signal, you can set it to “
Auto
” and your ARCHOS
will scan the DVR station inputs to see which one is receiving video.
1.
2.
3.
4.
5.
-
-
-