Справочник Пользователя для APRILIA atlantic 500
18
use and maintenance Atlantic 500
CONTROLS ON THE RIGHT SIDE OF THE HANDLEBAR
IMPORTANT
The electric components work only when the igni-
tion switch is in position “
”.
1) LIGHT SWITCH (
-
•
) (non provided
)
Before operating the light switch, make sure that the dimmer
switch (
switch (
-
) is in position “
”.
When the light switch is in position “
•
”, the lights are off; when
it is in position “
“, the parking lights and the dashboard light
are on; when the switch is in position “
” the parking lights, the
dashboard light and the low beams are on.
CAUTION
By means of the dimmer switch, (
-
), it is possible to oper-
ate the high beam.
1a) DIMMER SWITCH (
-
)
When it is in position “
” the parking lights, the dashboard light
and the low beams are always on; when it is in position “
”, the
high beam comes on.
2) ENGINE STOP SWITCH (
-
)
Do not operate the engine stop switch “
-
” in running
conditions.
It is a safety or emergency switch. When it is in position “
”,the
engine can be started. If it is in position “
”,the engine stops.
With stopped engine and ignition switch in position “
” the
battery may run down. With stopped vehicle, stop the engine
and then turn the ignition switch to position “
and then turn the ignition switch to position “
”.
3) START PUSH-BUTTON (
)
By pressing the start push-button “
“, the starter makes the
engine run. For the starting, see page 34 (STARTING).
DEACTIVATION
By inserting the key into the ignition switch and turning it to position
“
By inserting the key into the ignition switch and turning it to position
“
”, the device is automatically disconnected.
WARNING
CAUTION
2
1
3
1a