Инструкция для aviosys ip power 9223k
- 21-
Ref#9223K05260001
Simply just type in the mac address of the system that you would like to start up and hit the send button and
the device will be activated.
the device will be activated.
Logout
Click on the Logout link after you finish each session of using the IP Power 9223K. This will ensure that any
other person that uses the device next will not be able to control the devices without logging in.
other person that uses the device next will not be able to control the devices without logging in.
Internal Time
Date/Time Settings
The date and time settings allow the user to synchronize the 9223K with their local time or a NTP server.
NTP: Network Time Protocol can be entered into the 9223K. Simply just enter the IP Address of the NTP
Server and hit the NTP button to synchronize. Then press save .
Local Time: The local time gets the time of the PC that is currently being used.
Server and hit the NTP button to synchronize. Then press save .
Local Time: The local time gets the time of the PC that is currently being used.
7.) Controlling the Device
CGI HTTP Commands
Http commands allow you to control the device with commands. The basic commands are provided below.
There are two ways to input http commands with authorization required
Password in http:
http://login:password@ipaddress:port/command
Password not in http:
http://ipaddress:port/command
Note: If you use the password not in http: command you will need to enter it when the browser asks
for the password.
There are two ways to input http commands with authorization required
Password in http:
http://login:password@ipaddress:port/command
Password not in http:
http://ipaddress:port/command
Note: If you use the password not in http: command you will need to enter it when the browser asks
for the password.
Help Command
The help command will give you the commands that are available on the device. Simply type the codes for
the correct code.
Ex:
the correct code.
Ex: