Справочник Пользователя для abstract vr8
Feature options
Feature options
Page 12
Page 13
Mirror tilt invert
I-t
Off
When this option is On, the up-down movement of the mirror is inverted.
Mirror pan/tilt swap
p-t
Off
When this option is On, the up-down and left-right movements of the mirror
are swapped over. In other words, channel 1 controls tilt and channel 2 controls
pan.
are swapped over. In other words, channel 1 controls tilt and channel 2 controls
pan.
Colour snap mode
CSN
Off
When On, the VR snaps to half colours. When off, the VR allows free
positioning of colours and crossfading between colours.
positioning of colours and crossfading between colours.
Gobo snap mode
GSN
ON
VR8: When On, the VR snaps to full gobos. When Off, the VR allows free
positioning of gobos and crossfading between gobos.
positioning of gobos and crossfading between gobos.
VR8-R: When On, the VR8R blacks out the gobo while it is changing. When Off,
the gobo changing is visible to the user.
the gobo changing is visible to the user.
CE compatibility mode
CE
ON
VR8: When Off, the VR behaves as a VR with all the VR features. When On, the
VR behaves as a CE-range head. Some VR features are not available in CE
compatible mode, but it does allow you to use the CE controller. For true CE
compatibility, Gobo Snap should also be turned on.
VR behaves as a CE-range head. Some VR features are not available in CE
compatible mode, but it does allow you to use the CE controller. For true CE
compatibility, Gobo Snap should also be turned on.
VR8-R: When On, condenses the 6 channel operation into 4 channels and uses
the CE-range control values. When Off, the unit operates in 6 channel VR
mode.
the CE-range control values. When Off, the unit operates in 6 channel VR
mode.
Display blanking mode
DBL
ON
When On, the display blanks after about 30sec if no buttons are pressed (DMX
or Light Show indicators remain lit). When Off, the display shows the DMX
channel all the time (or light show group if in light show mode). If the display is
blanked, it will light up when the VR’s status changes.
or Light Show indicators remain lit). When Off, the display shows the DMX
channel all the time (or light show group if in light show mode). If the display is
blanked, it will light up when the VR’s status changes.
Setting light show options
Light show group
LSG
1
The VR has a complex automatic light show facility which allows you to group
the lights for greater effect. This lets you set which of the 4 groups of lights the
VR will be part of. Press the right-hand button to change the light show group.
the lights for greater effect. This lets you set which of the 4 groups of lights the
VR will be part of. Press the right-hand button to change the light show group.
Light show enable
LSE
ON
When On, the VR will attempt to generate a light show when no DMX is
detected. (The VR with the lowest DMX channel number will become the
“Controller” VR in command of the light show, the others will automatically
slave to it). When Off, the VR will maintain its last DMX position if DMX is lost.
If you want a particular VR to control the light show, set the other VR’s to LSE
Off.
detected. (The VR with the lowest DMX channel number will become the
“Controller” VR in command of the light show, the others will automatically
slave to it). When Off, the VR will maintain its last DMX position if DMX is lost.
If you want a particular VR to control the light show, set the other VR’s to LSE
Off.
Slow mode
SLO
OFF
When On, the light show operates in “slow scan” mode. This option only has
any effect on the “Controller” VR in light show mode. It has no effect when the
VR is controlled by DMX or when it is a light show slave.
any effect on the “Controller” VR in light show mode. It has no effect when the
VR is controlled by DMX or when it is a light show slave.