Справочник Пользователя для HP 5187-2725
Known Problems and Troubleshooting
Uninstalling HP-UX 11i v2
Appendix B
151
Uninstalling HP-UX 11i v2
If you cannot resolve problems after installing HP-UX 11i v2, then you
may want to un-install it. The process depends upon the install process
you followed:
may want to un-install it. The process depends upon the install process
you followed:
•
Assuming that you have made a
make_net_recovery
tape using
Ignite-UX, boot the system from that media to return the OS and any
archived applications to the previous release. This is covered in
Chapter 11 of the Ignite-UX Administration Guide, available on the
Instant Information DVD and on the web:
archived applications to the previous release. This is covered in
Chapter 11 of the Ignite-UX Administration Guide, available on the
Instant Information DVD and on the web:
http://docs.hp.com
If you do not use Ignite-UX or do not have a current
make_net_recovery
tape, read on....
•
If your applications and data are on a separate disk from the OS,
cold-install the previous OS. This ensures a clean OS installation,
removing all previous upgrade and patch information.
cold-install the previous OS. This ensures a clean OS installation,
removing all previous upgrade and patch information.
•
If applications and/or data are on the same volume with the OS, boot
from the previously-saved system recovery tape to return to a
previous OS. These “expert recovery” processes are in Chapter 11 of
the Ignite-UX Administration Guide.
from the previously-saved system recovery tape to return to a
previous OS. These “expert recovery” processes are in Chapter 11 of
the Ignite-UX Administration Guide.
To determine which applications are on the system and where they are
located, use
located, use
swlist
. If you only need to remove applications or patches
from the system, use
swremove
. See the Software Distributor
Administration Guide for details.