Инструкции По Обслуживанию для HP designjet l65500

816

Move the printer

In this case, before switching off the printer, the ink must be removed from the tubes. You need to have 

the ink system cleaning tubes and 5 liter of distilled water.

The procedure below shows how remove the ink from one line of color. This operation must be repeated 

5 times (total of 5 hours).

Flushing the ink lines with distilled water and then with air removes the ink from the tubes, this enables you to remove 

and replace parts of the ink system. The flushing procedure is done one ink line at a time.

1.

Remove the printheads and store them in their caps.

2.

Remove the Left Side Front Panel See page 483.

3.

Remove the Left Side Rear Panel See page 483.

4.

Remove the Left Side Lateral Panel See page 483.

5.

Remove the Ink Cartridge.

6.

Carefully remove the intermediate tanks of the color you are 

going to flush

.

Store the intermediate ink tanks vertically. 

Failure to store them vertically can cause a broken 

bag.