Справочник Пользователя для HP color laserjet 3000n
6-18
ENWW
Printing on transparencies
When printing on transparencies, use the following guidelines:
z
Use Tray 1 to print on transparencies. If the optional multipurpose
tray is not installed in the Tray 1 location and you want to print
multiple transparencies, use Tray 2 or Tray 3.
tray is not installed in the Tray 1 location and you want to print
multiple transparencies, use Tray 2 or Tray 3.
z
Load a maximum of 50 transparencies in Tray 2 or Tray 3, and up
to 20 transparencies in Tray 1 if the optional multipurpose tray is
installed in the Tray 1 location. (Be sure the media does not exceed
the maximum stack height as indicated on the labels in each tray.)
Load a single transparency at a time if the single sheet manual feed
unit is installed in the Tray 1 location.
to 20 transparencies in Tray 1 if the optional multipurpose tray is
installed in the Tray 1 location. (Be sure the media does not exceed
the maximum stack height as indicated on the labels in each tray.)
Load a single transparency at a time if the single sheet manual feed
unit is installed in the Tray 1 location.
z
Handle transparencies using the edges. Oils from your fingers can
cause print quality problems.
cause print quality problems.
z
Use HP Premium Inkjet Transparency Film or HP Premium Plus
Inkjet Transparency Film, which is specifically designed to work
with your printer, or use other transparencies designed to work with
HP Inkjet printers. For information about ordering transparencies,
see “
Inkjet Transparency Film, which is specifically designed to work
with your printer, or use other transparencies designed to work with
HP Inkjet printers. For information about ordering transparencies,
see “
.”
Printing transparencies one at a time
To print a single transparency, use Tray 1. For instructions, see “
.”
To print multiple transparencies
1
Load a maximum of 20 transparencies into the optional
multipurpose tray with the rough side up and the white strip feeding
into the printer first.
multipurpose tray with the rough side up and the white strip feeding
into the printer first.
If the optional multipurpose tray is not installed, use Tray 2 or
Tray 3 with the transparencies facing rough-side down and the
white strip pointing forward into the tray. Load no more than 50
transparencies in Tray 2 or Tray 3. Be sure the media does not
exceed the maximum stack height as indicated on the labels in
each tray.
Tray 3 with the transparencies facing rough-side down and the
white strip pointing forward into the tray. Load no more than 50
transparencies in Tray 2 or Tray 3. Be sure the media does not
exceed the maximum stack height as indicated on the labels in
each tray.
For more information about loading media, see “
.”
2
In the printer driver, select Tray 1, Tray 2, or Tray 3 as the media
source, and then select HP Premium Transparency as the
media type.
source, and then select HP Premium Transparency as the
media type.
For more information about configuring settings in the printer driver,
see “
see “
.”
3
Print the document.