Справочник Пользователя для HP color laserjet 3000n
ENWW
4-19
Resetting the HP Jetdirect print server
Resetting the HP Jetdirect print server restores the factory default
values of the Jetdirect print server.
values of the Jetdirect print server.
Note
When you restore the factory default values for the HP Jetdirect
print server, all previously stored EIO settings are lost.
print server, all previously stored EIO settings are lost.
To reset the HP Jetdirect print server
1
Press and hold
(power button) to turn off the printer.
2
While holding down both (select button) and
(pause/resume
button) on the LCD control panel, turn on the printer.
IPX/SPX
ENABLE
FRAME TYPE
FRAME TYPE
This item enables the IPX/SPX menu,
which you can use to set the IPX/SPX
protocol parameters.
In the IPX/SPX menu, you can specify
the frame type parameter used on
your network.
The default is
which you can use to set the IPX/SPX
protocol parameters.
In the IPX/SPX menu, you can specify
the frame type parameter used on
your network.
The default is
AUTO
, which
automatically sets and limits the frame
type to the one detected.
For Ethernet cards, frame type
selections include
type to the one detected.
For Ethernet cards, frame type
selections include
EN_8023
,
EN_II
,
EN_8022
, and
EN_SNAP
.
For Token Ring cards, frame type
selections include
selections include
TR_8022
and
TR_SNAP
.
In the IPX/SPX menu for Token Ring
cards, you can also specify NetWare
Source Routing parameters, which
include
cards, you can also specify NetWare
Source Routing parameters, which
include
SRC RT=AUTO
(default),
OFF
,
SINGLE R
, or
ALL RT
.
APPLETALK
ENABLE
This item allows you to enable or
disable the AppleTalk protocol.
disable the AppleTalk protocol.
DLC/LLC
ENABLE
This item allows you to enable or
disable the DLC/LLC protocol.
disable the DLC/LLC protocol.
LINK SPEED
LINK SPEED
This item allows you to manually set the
link speed (10 or 100 Mbs).
link speed (10 or 100 Mbs).
Message
Value or
Submenu
Submenu
Description