Инструкции По Обслуживанию для HP color laserjet 2550 series
4. Unplug one connector (callout 4), and then lift the formatter from the formatter cage.
4
Figure 5-11.
Removing the formatter (2 of 2)
Reinstallation tip
Make sure that the metal clips on the interface connector are in the "open" position,
perpendicular to the connector. If they are in the "closed" position when the formatter is
reinstalled, they do not fit correctly through the hole in the formatter cage.
perpendicular to the connector. If they are in the "closed" position when the formatter is
reinstalled, they do not fit correctly through the hole in the formatter cage.
ENWW
Removal and replacement
115