Инструкции По Обслуживанию для HP designjet l65500
Tr
ou
bles
hooting
Troubleshooting
191
Here is a picture of an ink bag extracted from the cartridge box when the printer has reported it as
empty
•
If the same bag, you unfold it (and be also done by letting it hang from a corner for one day
for example)
•
Hanging the bag from a corner
So even if the bag was really squeezed at the beginning, after unfolding it, there seems to be more ink
remaining in the bag, this remaining quantity should not exceed 100cc of ink, and with a new cartridge,
we are all the time adding more ink in order to ensure that the customer can use the 3 liters of ink.
TIPS: If the customer is willing to use a part of this remaining ink, use the following procedure:
•
BEFORE the printer displays the cartridge as empty, disconnect the cartridge, remove the car-
ton and unfold the ink bag
•
Place the unfolded ink bag at the place of the cartridge box
•
Connect again the cartridge connector
IMPORTANT: This procedure must be performed with the ink cartridge disconnected, if not there is a risk
of creating a system error of the ink pressure sensor and then having an ink leakage.