Инструкции По Обслуживанию для HP digital sender 9200c
3
Disconnect one connector (callout 3), remove one grounding screw and wire (callout 4), and
unclip one wire clip (callout 5).
unclip one wire clip (callout 5).
3
5
4
Figure 6-95
Removing the optical assembly (2 of 4)
4
Loosen one screw (callout 6) to release the tension on the drive belt.
6
Figure 6-96
Removing the optical assembly (3 of 4)
138
6 Removal and replacement