Справочник Пользователя для HP deskjet 970c
18
Using Your Printer
1
Single envelope slot
OUT tray down
OUT tray up
IN tray pushed in
Paper length guides
Paper width guide
Paper length guides
IN tray
pulled out
pulled out
See next page
What do you want to print
What you need to do
Banners
1
Tear off the number of sheets (up to 20) you need.
2
Tear off and discard the perforated strips, if any.
3
Slide out the paper guides, and remove all paper from
the IN tray.
the IN tray.
4
Raise the OUT tray and leave it in the Up position.
5
Put the paper in the IN tray so that the unattached
edge is at the top of the stack. Insert the first edge into
the IN tray until it stops. Make sure the IN tray is
pushed in.
edge is at the top of the stack. Insert the first edge into
the IN tray until it stops. Make sure the IN tray is
pushed in.
6
Slide paper guides snugly against the sheets.
7
Check
Banner Printing
and choose the appropriate
paper type and size.
8
Print the banner.
Posters
1
Load paper in the IN tray.
2
Slide the paper guides snugly against the sheets.
3
Choose the print settings that match the type and size
of your poster.
of your poster.
4
Print your poster.
970C.book Page 18 Tuesday, February 1, 2000 11:31 PM