Инструкции По Обслуживанию для HP g6000 compaq presario f500

Remove the WLAN module (3) by pulling it away from the socket at an angle .

WLAN modules are designed with a notch (4) to prevent incorrect installation into the

WLAN module socket.

Reverse this procedure to install a WLAN module.

All optical drive spare part kits include an optical drive bezel.

DVD±RW and CD-RW Super Multi Double-Layer Combo Drive

442883-001

DVD-RW and CD-RW Combo Drive

442884-001

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe

453048-001**

** For use with F550–F579, G6000 models

 

Before removing the optical drive, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power cord.

Remove the battery (see 

Remove the optical drive:

Position the computer with the left side toward you.

Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.

Insert a thin tool, such as a paper clip (2), into the media tray release hole. (The optical drive media

tray is partially ejected from the optical drive bay.)

36 Chapter 4   Removal and replacement procedures