Инструкции По Обслуживанию для HP laserjet 3390, 3392 all-in-one
3.
Disconnect four connectors (callout 2) from the ECU. Remove the wire-harness from the guides
(callout 3).
(callout 3).
2
3
Figure 5-60
Remove the fuser (2 of 11)
4.
Pull the tabs on the wire-harness holders (callout 4 and callout 5), slide them toward the center of
the all-in-one to release them from the frame, and then remove the wire-harnesses.
the all-in-one to release them from the frame, and then remove the wire-harnesses.
5
4
Figure 5-61
Remove the fuser (3 of 11)
158
Chapter 5 Removal and replacement
ENWW