Справочник Пользователя для HP m2727 mfp

The following are a few simple steps you can take to improve copy and scan quality.

●

Use the flatbed scanner, rather than the automatic document feeder (ADF) input tray, to scan.

●

Use high-quality originals.

●

Load the media correctly. If the media is loaded incorrectly, it might skew, which causes unclear
images. See 

 for instructions.

●

Adjust the software settings according to how you plan to use the scanned page. See 

 for more information.

●

If your product frequently feeds more than one page at a time, the separation pad might need to
be replaced. Contact HP. See 

 or the support flyer that came in the

product box.

●

Use or make a carrier sheet to protect your originals.

Blank pages

The original might have been loaded upside
down.

In the automatic document feeder (ADF), put
the top end of the stack of originals into the
ADF input tray, with the media stack face-up
and the first page to be scanned on top of
the stack.

On the flatbed scanner, place the original
document face-down with the upper-left
corner of the document at the lower-right
corner of the glass.

Too light or dark

The resolution and color levels may be set
incorrectly.

Verify that you have the correct resolution
and color settings. See 

.

Unwanted lines

Ink, glue, correction fluid, or an unwanted
substance might be on the glass.

Clean the flatbed scanner surface. See

The ADF glass might be dirty.

Clean the scanner strip. See 

 (step 3).

Black dots or streaks

Ink, glue, correction fluid, or an unwanted
substance might be on the glass.

Clean the flatbed scanner surface. See

The power to the product might have
fluctuated.

Reprint the job.

Unclear text

The resolution levels might be set
incorrectly.

Verify that the correct resolution settings are
correct. See 

To solve fax issues, see 

.

ENWW

Solve image-quality problems 201