Справочник Пользователя для HP lc3760n

Скачать
Страница из 186
Setting Up
Setting Up
9
4
Insert the assembled stand into the opening on the 
bottom of the TV.
5
Insert four long screws into the holes on the back 
of the TV and tighten using the provided tool.
6
Carefully lift the TV and set it upright.
Setting Up the TV
Set up the TV by connecting cables and connecting the 
power cord.
Connecting the TV signal source
The following is an explanation of the types of 
connections that are used for a coaxial cable. If your 
outdoor antenna uses a 75-ohm coaxial cable with an 
F-type connector, plug it into the antenna/cable 
terminal at the rear of the TV set.
A 75-ohm system is generally a round cable with 
an F-type connector that can easily be attached to 
a terminal without tools (sold separately).
A 300-ohm system is a flat, twin-lead cable that 
can be attached to a 75-ohm terminal through a 
300/75-ohm adapter (sold separately).
A: 75-ohm coaxial cable, round
B: 300-ohm twin-lead cable, flat
C: F-type connector
w
WARNING: Before connecting the TV to any 
other electronic device, unplug the TV and 
electronic device AC cords from the AC 
input.
n
An F-type connector should be finger-
tightened only. When connecting the RF 
cable to the TV set, do not use tools to 
tighten the F-type connector, as it may 
cause damage to your TV set.
A
B
C