Справочник Пользователя для HP lc3760n

This menu allows you to set the Audio Setup for the 
Digital Audio Output connector.

The TV provides digital audio output for an AV 
amplifier or similar device connected to the Digital 
Audio Output terminal on the TV. Select an audio 
output format compatible with the audio format of the 
program you are watching and the connected 
equipment.

For non-tuner input sources, select how the picture 
appears by choosing the Aspect option. You use this 
menu by pressing the Aspect button on the remote 
control to change the dimensions of the picture image. 
The options depend on the current input source.

■

Side Bar — shows the standard 4:3 ratio picture 
image in the center of the TV with dark bars on the 
left and right.

■

Smart Stretch (S.Stretch) — horizontally 
stretches the TV picture, if necessary, to fill the 
screen; the center of the screen has aspect 
correction. Suitable for stretching normal 4:3 
programs to fill the screen.

■

Zoom — proportionally stretches the TV picture, 
but clips the top and bottom of the image to fit the 
screen. Eliminates black bars.

■

Stretch — shows high-definition TV in its normal 
format, and standard-definition TV at full-screen 
without aspect correction applied to the center of 
the screen. Recommended for anamorphic 
pictures.

Sets the Digital Audio 
Output mode.

The optical output terminal 
outputs audio signal in PCM 
form. Choose this option when 
your digital audio system does 
not support Dolby Digital, or 
when the source is analog, such 
as from an analog channel.

The optical output terminal 
outputs audio signal in Dolby 
Digital form from digital 
programming.