Инструкции По Обслуживанию для HP mini-note 2133 2140
Select
To do this
System IDs (Windows only)
Enter a user-defined computer asset tracking number and
ownership tag.
ownership tag.
Disk Sanitizer (Windows only)
Run Disk Sanitizer to destroy all existing data on the primary
hard drive. The following options are available:
hard drive. The following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●
Custom: Allows you to select the desired number of Disk
Sanitizer erase cycles from a list.
Sanitizer erase cycles from a list.
CAUTION:
If you run Disk Sanitizer, the data on the primary
hard drive is destroyed permanently.
Notebook hard drive password status (Linux only)
Enable/disable hard drive password status visibility.
Diagnostics menu
Select
To do this
HDD Self-Test Options
Run a comprehensive self-test on any hard drive in the system
or on any optional MultiBay hard drive.
or on any optional MultiBay hard drive.
Memory Check
Run a comprehensive check on system memory.
System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
Language (Windows only)
Change the Computer Setup language.
Boot options
●
Set an
f9
,
f10
, and
f12
delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot.
●
Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
can include most boot devices in the system.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
◦
1st boot device: USB CD-ROM
◦
2nd boot device: USB floppy
◦
3rd boot device: USB SuperDisk
◦
4th boot device: Notebook hard drive
◦
5th boot device: USB hard disk
Computer Setup menus
77