Инструкции По Обслуживанию для HP omnibook 4000
___________
17
Supported
Operating
Systems
Operating
Systems
MS DOS version 6.22*
Microsoft Windows for Workgroups 3.11*
Microsoft Windows 95*
Microsoft NT workstation 3.51**
OS/2
®
version 3.0**
* Supported to the application level. ** Only setup and configuration supported.
Security
Physical security from Kensignton Lock
System password: When the password setting is enabled, a window will pop-up
to allow the user to enter the old password, enter a new password and to verify
the new
to allow the user to enter the old password, enter a new password and to verify
the new
Password
Decode
Decode
If the user forgets the system password, there is a master password that will
unlock the Omnibook. The user calls Technical Support to determine this master
password as follows:
unlock the Omnibook. The user calls Technical Support to determine this master
password as follows:
1. Support will tell the user the keys to type at the password entry screen:
[alt][shft][f10]
[alt][shft][f10]
2. The Omnibook generates and displays an encoded master password.
This is displayed under the normal password entry area. At this point, this
is the only password that will unlock the Omnibook unless the user presses
[ESC] to remove the encoded master from the password entry screen.
Then the user's stored password can be entered.
This is displayed under the normal password entry area. At this point, this
is the only password that will unlock the Omnibook unless the user presses
[ESC] to remove the encoded master from the password entry screen.
Then the user's stored password can be entered.
3. The user reads the encoded master password to Support.
4. Support runs a program that decodes the encoded password, and reads
the decoded password (alphanumeric) to the user.
the decoded password (alphanumeric) to the user.
5. The user types in the decoded password.
6. Omnibook decodes the encoded master password it generated and
compares it to the decoded password typed in by the user.
compares it to the decoded password typed in by the user.
7. If the two passwords match, the Omnibook is unlocked. The forgotten
password is automatically erased. Support can then guide the user through
the process of entering a new password.
password is automatically erased. Support can then guide the user through
the process of entering a new password.
8. If the two passwords do not match, the previous sequence must be
repeated until the user correctly enters a master password.
repeated until the user correctly enters a master password.
The encoded master password is an eight-character alphanumeric sequence that
the Omnibook generates at random every time the appropriate keys are
pressed in the password entry screen. Because it is generated randomly, a
master password can only be used to unlock the Omnibook once. If the user
forgets the password at another time, it will require another call to Support. (If
the user presses the appropriate keys by mistake, pressing [ESC] will allow
entering the stored password.)
the Omnibook generates at random every time the appropriate keys are
pressed in the password entry screen. Because it is generated randomly, a
master password can only be used to unlock the Omnibook once. If the user
forgets the password at another time, it will require another call to Support. (If
the user presses the appropriate keys by mistake, pressing [ESC] will allow
entering the stored password.)