Инструкции По Обслуживанию для HP omnibook 4000
___________
26
Palm Rest Assembly and Track Ball Assembly
(HP Authorized Support Providers Only)
(HP Authorized Support Providers Only)
Before removing the Palm Rest Assembly or Track Ball Assembly, the battery and
the floppy disk drive assembly (a second battery may be installed in to the floppy
drive bay) must be removed. See instructions for removal of these two modules.
the floppy disk drive assembly (a second battery may be installed in to the floppy
drive bay) must be removed. See instructions for removal of these two modules.
In the floppy disk drive and battery bays are four Phillips screws, two in each bay.
Remove these four screws while the unit is upside down (see illustration below).
Remove these four screws while the unit is upside down (see illustration below).
Palm Rest
Screws (4)
Screws (4)
Figure 7 - Lower Case Screws