Инструкции По Обслуживанию для HP omnibook 4000
___________
30
Power Board (PCA Assy PK-DC)
(HP Authorized Support Providers Only)
(HP Authorized Support Providers Only)
Required Equipment:
•
Phillips Screwdriver
Components to remove prior Power Board (PCA Assy PK-DC):
1. HDD, FDD, and Battery
2. Palm Rest Assembly (may remain connected)
3. Keyboard (may remain connected)
1. HDD, FDD, and Battery
2. Palm Rest Assembly (may remain connected)
3. Keyboard (may remain connected)
Removal Procedure:
1. Remove Battery, Floppy Disk Drive, and Hard Disk Drive.
2. Follow the Palm Rest Assembly Removal Procedure to remove this component.
1. Remove Battery, Floppy Disk Drive, and Hard Disk Drive.
2. Follow the Palm Rest Assembly Removal Procedure to remove this component.
Note, the Palm Rest only needs to be lifted out; it may remain connected.
3. Follow the Keyboard Removal Procedure. Note, the Keyboard only needs to be
lifted out; it may remain connected.
4. Remove the Power Board by gently rocking back and forth. See Figure 10 for
component location.
Replacement Procedure:
1. Simply reverse the above Removal Procedure.
1. Simply reverse the above Removal Procedure.