Справочник Пользователя для HP pavilion lc3700n

Connect the input sources to the TV according to the 
type of connection: 

■

Antenna or basic cable (TV cable or satellite) 
without using a set-top box: see “Connecting the 
cable TV or the air broadcast antenna” on 
page 12.

■

Cable with a CableCARD (U.S. only): see “Using 
a CableCARD” on page 13.

■

Cable or satellite with a separate set-top box: see 
“Connecting cable or satellite with a set-top box” 
on page 15.

Use standard 75-ohm coaxial cable to connect a 
ground antenna or cable TV input source to the TV. Use 
shielded coaxial cable to reduce radio frequency (RF) 
interference. 

Optional equipment, cable TV service, splitters, 
combiners, and all cables are sold separately.

Connect the input source coaxial cable to the 
Analog Air In (A), Digital Air In (B), or Digital 
Cable In (C) connectors on the back of the TV.

■

For broadcast signals, you can use a combiner 
to add together your VHF antenna, UHF 
antenna, and digital antenna. Then, use a splitter 
(E) to connect the signal cable to both the Analog 
Air In and Digital Air In connectors (F) on the TV.

■

For cable without a CATV converter, use a 
combiner to add together your broadcast 
antenna signals (see previous bullet) and the 
cable signal. Then, use a splitter (E) to connect 
the signal cable to both the Analog Air In and 
Digital Air In connectors (F) on the TV.

■

For cable with a CATV converter, use a splitter 
(E) to connect the signal cable to both the 
Analog Air In and Digital Cable In connectors 
(H) on the TV.

n

n

■

■

c