Справочник Пользователя для HP pavilion f2304

Ä

CAUTION: Ensure that the front bezel of the monitor is positioned 
over a flat table or desktop to prevent it from getting scratched, 
defaced, or broken when removing the base from the monitor.

To remove the monitor base:

1. Disconnect and remove the signal and power cables 

from the back of the monitor.

2. Lay the monitor face down on a flat area.

3. Remove the back panel by gently pulling on the handle 

and then slowly easing the tabs around the panel out of 
the tab slots. 

4. Remove the four screws from the monitor base as shown 

in the following illustration.

5. Remove the monitor base from the monitor.