Справочник Пользователя для HP proliant dl380 g7 633407-001
Removal and replacement procedures 35
To replace the component, reverse the removal procedure.
Hot-plug power supply
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the power supply or
power supply blank to cool before touching it.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To remove the component:
1.
Determine how many hot-plug power supplies are installed:
o
o
If more than one hot-plug power supply is installed, continue with the next step.
2.
Disconnect the power cord from the source.
3.
4.
Remove the power cord from the server.
5.
Remove the hot-plug power supply.
WARNING:
To reduce the risk of electric shock or damage to the equipment, do not connect the
power cord to the power supply until the power supply is installed.
To replace the component:
1.
Slide the hot-plug power supply into the power supply bay.
2.
Connect the power cord to the power supply.
3.
Install the cable management arm, if removed ("
" on page
4.
Route the power cord through the cable management arm or power cord anchor.