Справочник Пользователя для Canon BJ-10sx

If your print quality is not what you expect it to be, check the following 
list for your problem and a possible remedy.

The print head cleaning procedure is described later in this chapter.

NOTE: If you are using Windows and your output appears jagged, run 
the printer setup program and make sure the resolution setting in 360 x 
360 dpi.

Blurred 
character

Paper type

Try a different paper type; use 

paper that meets the printer's 
specifications.

Faded print

Print head is clogged 
or out of ink

Clean the print head or replace the 
ink cartridge.

Light 
characters

Printer is in 
economy mode

Set the printer to HQ mode.

White 
streaks

Print head is clogged Clean the print head.

Dots missing Print head is clogged Clean the print head

Irregular 
dots

Print head is clogged Clean the print head

Print appears 
dirty

Paper thickness dial 
needs to be adjusted

Adjust the paper thickness dial for 
the type of paper you are using.

To avoid paper loading problems, follow these guidelines:

z

Only use paper that matches the printer's specifications. See 
Appendix A, Printer Specifications, for details.

z

Make sure the inner cover is closed.

z

Make sure the paper release lever is pressed all the way down.

z

Make sure the sheet of paper is straight in the printer.