Инструкция для Canon smartbase pc1210d, pc1230d, pc1270d
SERVICE BULLETIN
COPIER
Issued by Canon Europa N.V.
MODEL:
SmartBase
PC1230D,
No.:
PC1200S-005
SmartBase PC1210D,
(FF-T01-L6-000023-01)
SmartBase PC1270D
Date:
26.07.02
LOCATION:
PAPER FEEDER ASSEMBLY
SUBJECT:
CHANGE OF SHAPE AND MATERIAL OF FEEDER BEARING
Reason :
Measure to prevent the feeder bearing from breaking during assembling.
Outline :
1. The weld line is created on the feeder bearing upon welding due to the
position of the sprue.
This weld line makes the feeder bearing brittle, resulting in the breakage
during assembling.
To improve the strength, the shape of the feeder bearing is changed.
2. The breakage still occurred during the drop test after the aforementioned
during assembling.
To improve the strength, the shape of the feeder bearing is changed.
2. The breakage still occurred during the drop test after the aforementioned
measure was taken.
Therefore, the material of the feeder bearing is also changed from LA541 to
Delrin500P.
3. While the revision number of the service part number is not advanced, all the
Delrin500P.
3. While the revision number of the service part number is not advanced, all the
service parts to be stocked are the new parts to which these changes have been
made.
made.
4. It is difficult to make the distinction between the old and new parts because the
difference in shape is between 0.1mm and 0.2mm and there is little difference in
color.
color.
Parts
Part Name
Part No.
UNIT No.
Qty
IC
Location
Old BUSHING
FB6-0261-000
1
NY
New BUSHING
FB6-0261-000
1