Справочник Пользователя для Samsung C675

Скачать
Страница из 168
User’s Manual
6-6
Battery doesn’t 
charge when the AC 
adaptor is attached 
(Battery indicator or 
DC IN/Battery 
indicator does not 
glow amber).
If the battery is completely discharged, it will not 
begin charging immediately, in these instances you 
should wait a few minutes before trying again. If the 
battery still does not charge, you should check that 
the power outlet the AC adaptor is connected to is 
supplying power - this can be tested by plugging 
another appliance into it.
Check whether the battery is hot or cold to the touch 
- if so, it will not charge properly and should be 
allowed to reach room temperature before you try 
again.
Unplug the AC adaptor and remove the battery to 
make sure its connecting terminals are clean - if 
necessary wipe them with a soft dry cloth lightly 
dipped in alcohol.
Connect the AC adaptor and replace the battery, 
taking care to ensure that it is securely seated in the 
computer.
(For Satellite L770/L775/L770D/L775D/Satellite Pro 
L770/L775/L770D/L775D Models) Check the 
Battery indicator - if it does not glow, allow the 
computer to charge the battery for at least twenty 
minutes. If the Battery indicator starts to glow after 
this period, allow the battery to continue to charge 
for at least another twenty minutes before turning 
on the computer. However, if the indicator still does 
not glow, the battery may be at the end of its 
operating life and should be replaced. However, if 
you do not believe the battery is at the end of its 
operating life, you should speak to TOSHIBA 
Support.
(For Satellite C670/C675/C670D/C675D/Satellite 
Pro C670/C675/C670D Models) Check the DC 
IN/Battery indicator - if it glows amber, charge the 
battery until the DC IN/Battery indicator glows 
green. If it glows green, disconnect the AC adaptor 
and operate the computer. If the computer shuts 
down, the battery may be at the end of its operating 
life and should be replaced. However, if you do not 
believe the battery is at the end of its operating life, 
you should contact a TOSHIBA Support.
Problem
Procedure