Справочник Пользователя для Samsung iDCS 16

13

You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–799 or from your personal list of numbers
00–49.

• Lift the handset and dial 16.
• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.

You can program frequently dialed telephone numbers in a personal speed
dial list. A station may be assigned up to fifty numbers, 00–49. See your sys-
tem administrator to determine the amount assigned to your station.

• Go offhook, dial 15 and then dial 105.
• Dial a speed dial number (00–49).
• Dial a line or line group access code.
• Dial the telephone number to be stored (18 digits maximum). It can

include #, 4.

• Simply go on-hook to store your dialed digits.

NOTES:
1.

If you are presented with an error tone at any time, then go on-hook and
resume from the beginning.

2.

Unfortunately, phones are not allowed to put a FLASH or a PAUSE into
your dialed-digit stream.

3.

There is no way to erase a previously programmed speed dialing bin,
but overwriting is allowed.

To redial the last telephone number you have dialed:

• Lift the handset and dial 19.

NOTE: Redial does not apply to intercom calls.

iDCS_16_SLT.qxd  12/14/2004  4:01 PM  Page 17

14

To save the number you have just dialed for later use:

• Before hanging up, hookflash, receive confirmation tone and dial 17.

To redial this saved number at any time:

• Lift the handset and dial 17. This step will select the same line and dial

the number for you.

This telephone number is stored in memory until you save another. When
you do, the new number will be saved and the old number will be erased.

NOTE: Save Number does not apply to intercom calls.

When making an outside call on a dial pulse line, press #. All digits dialed
after the # will be sent as tones.

iDCS_16_SLT.qxd  12/14/2004  4:01 PM  Page 18