Справочник Пользователя для Samsung ITP-5107SIP

Utilize the following programming steps to program the ITP-5107S keyset to
operate within the users network. YOU CAN SELECT THE SYSTEM EASY WIZARD
TO PROGRAM ALL REQUIRED NETWORK PARAMETERS IF YOU WANT TO SET
UP THESE PARAMETERS INDIVIDUALLY FOLLOW THE INSTRUCTIONS BELOW.

Get into the SETUP MODE as shown on page
8. From the Setup, Main Menu, select [3. NET-
WORK SETUP] to set or modify the network
parameters. Scroll to this option using the
volume [

]~[] button and press SPEAKER.

Select the Network Mode Setup and press
SPEAKER, the LCD will display this message.

•

If [1. MANUAL IP] is selected, the user must enter the IP address of the IP key-
set. Then enter the subnet mask, and gateway value for the customer net-
work.

•

If [2. DHCP] is selected, the IP address, subnet mask, and gateway value will
be obtained automatically (if a DHCP server is present).

•

From the “Network Mode Setup” Menu,
select  [1. MANUAL IP] and press
SPEAKER. Next, press the HOLD button
twice to get to the NETWORK SETUP
MENU as seen here.

Enter the IP keyset’s IP address, the net-
work’s netmask and gateway as shown.

• Select 

the 

menu and press SPEAKER, the LCD will
display this message and the user can
enter its IP address.

Check if there is any currently saved IP address of the phone on the LCD. If the IP
address has not been set, the LCD displays nothing. The user can enter the IP
address using [0]-[9] dial buttons and [

] button for entering a “.” Save that IP

address by pressing the SPEAKER button. Use the HOLD button to backspace.

3.NETWORK MODE SET UP

 

 

>1.MANUAL IP 
 2.DHCP 

11

 1.NETWORK MODE SET UP

 

 2.IP ADDRESS SET UP 

 

3.NETMASK SETUP

 

 4.GATEWAY SETUP

 

INPUT IP ADDRESS & PRESS OK 
xxx.xxx.xxx.xxx 

5107S_keyset.qxp  5/9/2006  9:56 AM  Page 17