Справочник Пользователя для Samsung SINGLE LINE TELEPHONE

5 

1.  Lift the handset. 
2.  Dial the extension number or group number. 
3.  Wait for the party to answer.  

(If you hear several brief tone bursts instead of ringback tone, the station you 
called is a digital keyset set for Voice Announce or Auto Answer. Begin speaking 
immediately after the tone.) 

4.  Finish the call by replacing the handset. 

1.  Lift the handset and you are automatically connected to the ringing call. 
2.  Finish the call by replacing the handset. 

When you call another station and you receive a busy signal: 

1.  Press Recall, listen for transfer tone and dial 44. 
2. Hang 

up. 

3.  When the busy station becomes free, your telephone will ring.  
4.  Lift the handset to automatically call the now idle station.  

NOTE: You have 30 seconds to answer or the callback will be cancelled. 

When you call another station and receive a busy signal but you do not want to wait for a 
call back: 

1.  Press Recall, listen for transfer tone and dial 45.  
2.  The called station will receive off-hook ring or camp-on tone. 
3.  You will hear ringback tone. 
4.  Wait for the called party to answer.                

The called station must release its first call or put it on hold before answering your camp-
on. 

Dial the appropriate system code to call your system operator or group of operators. This 
is normally 0 or 9. 

If you want to call a specific operator, dial that person’s extension number.