Справочник Пользователя для Samsung sv-dvd54t
ENG-14
4
Press the corresponding
or
❷
buttons, until the
Colour System option is selected.
5
Press the OK or
❿
button to select
Auto
➝
PAL
➝
MESECAM
➝
B/W.
Auto When playing back a cassette, the system
standard is automatically selected by the
STB-DVD-VCR.
STB-DVD-VCR.
B/W
Black and White
6
On completion, press RETURN three time to exit
the menu.
the menu.
Your STB-DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the STB-DVD-VCR output
channel to adjust the frequency in which information is
displayed on the screen.
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the STB-DVD-VCR output
channel to adjust the frequency in which information is
displayed on the screen.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select
the Install option.
3
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4
Press the
or
❷
buttons, until the VCR Output
CH option is selected.
5
Select the required output channel (CH28~CH69)
by pressing the OK or
by pressing the OK or
❿
buttons
➝
CH28
➝
.. CH38
➝
.. CH69
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).
Then tune your television again (see page 9).
Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
➢
◆ When playing back a cassette, the standard is
automatically selected by the STB-DVD-VCR.
◆ When you playback an NTSC-recorded tape on
this STB-DVD-VCR make a setting on the
colour system according to your TV.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
colour system according to your TV.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select
the User Set option.
3
Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
Setting the STB-DVD-VCR Output
Channel
Channel
Selecting the Colour Mode
Auto Setup
Manual Setup
Install
38
CH 28
:
CH 38
:
CH 69
Colour System : Auto
IPC : On
G-Code Extend : Off
G-Code Extend : Off
User Set
Auto
PAL
MESECAM
B/W
PAL
MESECAM
B/W