Справочник Пользователя для Samsung sv-dvd54t
ENG-15
The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the MENU button on the
remote control.
Result: The Setup menu is displayed.
remote control.
Result: The Setup menu is displayed.
2
Press the OK or
❿
.
Result: The Setup menu is displayed.
3
Press the corresponding
,
❷
buttons to select
the User Set option.
4
Press the OK or
❿
buttons to select this option.
Result: The User Set menu is displayed.
Intelligent Picture Control
Colour System : Auto
IPC : On
G-Code Extend : Off
G-Code Extend : Off
User Set
On
Off
Off
5
Press the corresponding
or
❷
buttons, until the
IPC option is selected.
6
Press the OK or
❿
buttons to select the IPC
(intelligent picture control) option.
➢
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
sharpness of the image is adjusted
automatically.
7
To adjust the sharpness manually, press the
❷
button to turn the IPC mode OFF.
8
Press the
➛
or
❿
buttons until the picture is
displayed according to your preferences.
➢
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
the PICTURE menu disappears automatically.
9
On completion, press RETURN three times to exit
the menu.
the menu.
➢
You can use the IPC function with ease by
using the ANGLE key on the REMOCON.
using the ANGLE key on the REMOCON.
To prevent delays or over-runs the STB-DVD-VCR has a
function called G-CODE EXTEND allowing you to
extend the recording time by up to 60 minutes.
function called G-CODE EXTEND allowing you to
extend the recording time by up to 60 minutes.
1
After pressing the MENU, press the OK or
❿
.
2
Press the corresponding
,
❷
buttons to select
the User Set option.
3
Press the OK or
❿
buttons to select this option.
Result: The User Set menu is displayed.
4
Press the corresponding
,
❷
buttons, until the
G-Code Extend option is selected.
5
Press the OK or
❿
buttons to set the G-Code
Extend time by increments of 10 minutes.
6
To turn off, press OK or
❿
buttons repeatedly until
Off shows.
G-CODE Extend
Colour System : Auto
IPC : On
G-Code Extend : Off
G-Code Extend : Off
User Set
Off
10
20
30
40
50
60
20
30
40
50
60