Справочник Пользователя для Sony 5500

21

2-1 Control Panel

  Cha

p

te

r 2  

L

o

c

a

tions
 and

 F

u

n

c

tion
s

 of

 P

a

rt

s

Page 2: System status
ACTIVE LINE: Shows the status of 1080/1035 

conversion active line.
1080

t1080

1080

t1035(CROP)

1080

t1035(CONV)

1035

t1035

1035

t1080(PANEL)

1035

t1080(CONV): Shows the current conversion 

status.

- - - - -: Cannot be converted.
OFF: No conversion done.

DOWN CONV. OUTPUT: Shows the output status of the 

down converter.
ACTIVE: Output.
MUTING: No output.

EOS: Appears at the location of the time code for the valid 

end of the previous recording.

Page 3: Phase (OUTPUT)
HD SDI OUTPUT ADV.: Shows the phase of the main 

line HD SDI output.
OFF: In phase with reference.
–90H: 90H (HD) advanced with respect to reference.

DOWN CONV. OUTPUT ADV.: Shows the phase of the 

down converter output.
OFF: In phase with reference.
–2H: 2H (SD) advanced with respect to reference.

Page 4: Phase (AUDIO)
AUDIO PB OUTPUT ADV.: Shows the phase of the 

audio output signal.
OFF: Output in phase with the video output signal.
–1Frame: Output one frame advanced with respect to 

the video output signal.

AUDIO INPUT DELAY: Shows the recording phase of 

the audio input signal.
OFF: Recorded in phase with the video output signal.
+1Frame: Recorded one frame delayed with respect to 

the video input signal.

AES/EBU & ANA OUTPUT: Shows the phase of the 

AES/EBU and ANALOG AUDIO outputs.
REF: Output in phase with reference.
FC: In phase with the FC output.
–90H(HD): 90H (HD) advanced with respect to 

reference.

–2H(SD): 2H (SD) advanced with respect to 

reference.

Page 5: Phase (TC)
TC INPUT DELAY: Shows the recording phase of the 

input time code.
OFF: Recorded in phase with the input video signal.
+1Frame: Recorded one frame delayed with respect to 

the input video signal.

LTC OUTPUT: Shows the phase of the output LTC.

LINE: Output in phase with the main line HD SDI 

output.

FC: Output in phase with the FC output.

Page 6: Meta Data
The display changes depending on the tape format in use.
• HDCAM-SR

META DATA LINE(REC): Shows the status of the 

three lines for metadata recording on this unit.

META DATA LINE(OUT): Shows the status of the 

three lines of main HD SDI output into which 
metadata is multiplexed.

META DATA LINE(FC): Shows the status of the three 

lines of output from the optional HKSR-5001 
format converter board into which metadata is 
multiplexed.

META DATA LINE(SD): Shows the status of the three 

lines of SD SDI output into which metadata is 
multiplexed.

Displays L1/L2/DID/SDID. This combination is 
counted as 1 packet. Up to 3 packets can be recorded.
On the SRW-5500, the system settings related to 
recording are shown on the left. If data is detected in the 
input signal, the L1/L2 values are highlighted. The right 
side shows playback values detected on the tape.

The ACTIVE LINE setting displayed on page 2 can be 
made in the SYSTEM screen. The phase settings displayed 
on pages 3 to 5 and the settings relating to META DATA 
recording displayed on page 6 can be made in the PHASE 
SET/META DATA menu under the ALT+OTHERS 
CHECK menu in the MAINTENANCE menu.

b REF SYNC (reference signal) indicators
These indicate the signal selected as the reference signal. 
If there is no reference signal input to the selected 
connector, the STOP button flashes.
EXT SD: Lights when “extern SD” is selected by the VTR 

SETUP menu item 006 “EXTERNAL REFERENCE 
select”.

EXT HD: Lights when “extern HD” is selected by the 

VTR SETUP menu item 006 “EXTERNAL 
REFERENCE select”.

INPUT VIDEO: Lights when “INPUT” is selected by the 

VTR SETUP menu item 005 “SERVO/AV 
REFERENCE select”.

c PREREAD indicator
Lights up during preread mode.