Справочник Пользователя для Sony bravia kdl-40w40xx

 GB

Press 

F

/

f

 to select the country/region in 

which you will operate the TV, then press 

.

If the country/region in which you want to use 
the TV does not appear in the list, select “-” 
instead of a country/region.

Press 

F

/

f

 to select the location type in which 

you will operate the TV, then press 

.

~
Sony recommends you to select “Home” for power saving.

This option selects the initial picture mode 
appropriate for the typical lighting condition in 
these enviroments.

Select OK then press 

.

Press 

F

/

f

 to select “Antenna” or “Cable”, 

then press 

.

If you select “Cable”, the screen for selecting the 
scan type appears. See “To tune the TV for 
Cable connection” (page 8).

The TV starts searching for all available digital 
channels, followed by all available analogue 
channels. This may take some time, so do not 
press any buttons on the TV or remote while 
proceeding.
If a message appears for you to confirm the 

aerial connection
No digital or analogue channels were found. 
Check all the aerial/cable connection and then 
press 

 to start auto-tuning again.

When the Programme Sorting menu appears 
on the screen, follow the steps of  
“Programme Sorting”(page 28).
If you do not change the order in which the 
analogue channels are stored on the TV, press 

 to go to step 4.

For details, see page 24.

For details, see page 19.

Press .
The TV has now tuned in all the available 
channels.

~
When a digital broadcast channel cannot be received, or 
when selecting a region in which there are no digital 
broadcasts in step 3 (page 7), the time must be set after 
performing step 3.

010COV.book  Page 7  Wednesday, March 19, 2008  9:51 AM