Справочник Пользователя для Sony cdx-c810dsp
14
Actual total number:
Sony CDX-C810DSP (
E
,F,G,I) 3-856-118-11(2)
EN
Erasing the stored surround effect
Press (5) (ENTER) for two seconds in
step 2 of “Registering a surround menu
onto each disc.”
step 2 of “Registering a surround menu
onto each disc.”
Selecting the listening
position
position
You can set the time for the sound to reach the
listeners from the speakers.
The unit can to simulate a natural sound field
so that you can feel as if you are is in the centre
of the sound field wherever you sit in the car.
listeners from the speakers.
The unit can to simulate a natural sound field
so that you can feel as if you are is in the centre
of the sound field wherever you sit in the car.
1
Press (SOUND) momentarily until “POS”
appears.
appears.
2
Press (+) or (–) to select the desired
listening position.
The listening positions appear in the order
shown in the table.
listening position.
The listening positions appear in the order
shown in the table.
After three seconds, the display goes back
to the normal playback mode.
to the normal playback mode.
Adjusting the listening position
1
Press (SOUND) repeatedly until “POS”
appears.
appears.
2
Press (+) or (–) to select the desired
listening position appears.
listening position appears.
3
Press (SOUND) for two seconds.
Display
window
window
All
Front
Front-R
Front-L
Rear
Center of
soundfield
soundfield
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
2
1
3
4
Press (+) or (–) to adjust the centre of
the sound field to the left or right. Then
set the centre of the sound field.
the sound field to the left or right. Then
set the centre of the sound field.
5
Press (4) (n).
To go back to select the listening position,
press (1) (N).
press (1) (N).
6
Press (+) or (–) to adjust the centre of
the sound field to the front or rear.
the sound field to the front or rear.
7
Press (SOUND) for two seconds.
Adjusting the fader (FAD)
Normally, with the DSP mode on, the volume
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
1
Follow steps 1 to 3 of “Selecting a
surround menu” (page 13).
surround menu” (page 13).
2
Press (SOUND) repeatedly until “FAD”
appears.
appears.
3
Press (+) or (–) to adjust the fader.
After three seconds, the display goes back
to the normal playback mode.
to the normal playback mode.
Centre moves to the R (right).
Centre moves to the L (left).
Centre moves to the F (front).
Centre moves to the R (rear).
SUR EQ
PLAY MODE
ENTER
+DELETE+
D S M
Increases front speaker volume
Decreases front speaker volume
SUR EQ
All
P O S
SUR EQ
L R
P O S
SUR EQ
R F
P O S