для Sony CDX-MP80
19
Staying with one regional programme
When the AF function is on: this unit’s factory-
set setting restricts reception to a specific region,
so you won’t be switched to another regional
station with a stronger frequency.
If you leave this regional programme’s reception
area or would like to take advantage of the whole
AF function, select “REG off” from the MENU
(page 24).
set setting restricts reception to a specific region,
so you won’t be switched to another regional
station with a stronger frequency.
If you leave this regional programme’s reception
area or would like to take advantage of the whole
AF function, select “REG off” from the MENU
(page 24).
Note
This function does not work in the United Kingdom
and some other areas.
This function does not work in the United Kingdom
and some other areas.
Local Link function (United Kingdom
only)
only)
(With the card remote commander)
This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.
stations in the area, even if they are not stored on
your number buttons.
1
Press a number button (
(1)
to
(6)
)
that has a local station stored on it.
2
Within 5 seconds, press the number
button of the local station again.
button of the local station again.
3
Repeat this procedure until the
desired local station is received.
desired local station is received.
Receiving traffic
announcements
announcements
— TA/TP
By activating the Traffic Announcement (TA)
and Traffic Programme (TP), you can
automatically tune in an FM station broadcasting
traffic announcements. These settings function
regardless of the current FM programme, or
source (CD/MD, AUX); the unit switches back to
the original source when the bulletin is over.
and Traffic Programme (TP), you can
automatically tune in an FM station broadcasting
traffic announcements. These settings function
regardless of the current FM programme, or
source (CD/MD, AUX); the unit switches back to
the original source when the bulletin is over.
Press
(TA)
repeatedly until “TA on”
appears.
The unit starts searching for traffic
information stations.
“TP” indicates reception of such stations, and
“TA” flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
“NO TP” is indicated.
information stations.
“TP” indicates reception of such stations, and
“TA” flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
“NO TP” is indicated.
To cancel all traffic announcements, select “TA
off.”
off.”
Tip
You can also cancel the current announcement by
pressing
You can also cancel the current announcement by
pressing
(SOURCE)
or
(MODE)
.
Presetting the volume of traffic
announcements
announcements
You can preset the volume level of the traffic
announcements so you won’t miss hearing them.
announcements so you won’t miss hearing them.
1
Turn the VOL control dial to adjust the
desired volume level.
desired volume level.
2
Press
(TA)
for 2 seconds.
“TA” appears and the setting is stored.
Receiving emergency announcements
If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station, CD/MD, or
AUX.
emergency announcements, if one comes in
while listening to an FM station, CD/MD, or
AUX.
To
Press
Cancel current
announcement
announcement
(TA)