Справочник Пользователя для Sony dsr-20-20p

Chapter 2   Playback and Recording

Chapter 2

Playback and Recording

19

EN

• When you connect output jacks of the recorder to input jacks of this

VCR, select the input correctly to prevent a humming noise.

• Distorted signals (e.g., when played back at a speed other than normal)

will not be recorded properly.

• The indications displayed on the monitor screen are output only via

MONITOR jack.

• The LANC connection transmits signals such as control signals, time

code, time counter data and status data.

• If the other VCR has a LANC jack of 5-pin DIN type, connect with the

VK-810 Control L connecting cable (not supplied).

• The jacks labeled CONTROL L have the same function as LANC jacks.

The jacks labeled REMOTE may also have the same.

• The other VCR (recorder) receives the time code data from the LANC

jack only when this VCR (player) is set to show the time code
indications.

INPUT

OUTPUT MONITOR

CH-1

CH-2

CH-1/3

CH-1/3

CH-2/4

CONTROL S

IN

OUT

LANC

DV

IN/OUT

SYNC

DC IN 12V 2.5A

INT

EXT

VIDEO

 S VIDEO

CH-2/4

AUDIO

Other VCR

Monitor

This VCR

Video cable (not supplied)

S-video cable (not supplied)

Audio cable (not supplied)

LANC cable (not supplied)

Ç

: Signal flow

to the S-video
input jack

to the video input jack

to the audio input jacks

to the LANC jack