Справочник Пользователя для Sony dsr-20-20p

Chapter 2   Playback and  Recording

Chapter 2

Recording and Playback

29

EN

This section describes the necessary connections, settings and operations
to perform recording on this unit.  The same settings and operations apply
whether you are using the unit as part of an editing system, for dubbing, or
as a stand-alone recorder.

The video and audio signals are sent with hardly any degradation, enabling
high-quality editing. The signal flow is automatically detected so you need
not make separate connections for input and output.

• Audio signals are not output during playing at various speeds.
• With the DV connection, the sound is recorded in the same audio

recording mode as that of the source tape. To record in a different audio
recording mode from the source tape, use the LINE connection instead.

• With the DV connection, tape information (recording date, camcorder

data, etc.) recorded on the source tape is transmitted from the other VCR
(player). As a result, when you play back a recorded tape and press
DATA CODE,  the same tape information recorded on the source tape is
displayed on the monitor screen. However, contents of the cassette
memory are not transmitted. In addition, the time code is newly recorded
on the tape on this VCR, except when copying a tape in Duplicate mode.

• As for the LANC connection, see “Notes for LANC connection” on the

next page.

LANC

DV

IN/OUT

Other VCR

This VCR

Monitor

DV cable (not supplied)

LANC cable (not supplied)

ç

: Signal flow

to the DV
jack

to the LANC
jack