Справочник Пользователя для Sony dsr-1600.gb

7

Features

Cha

p

te

r 1  

 Ov

er
v

ie

w

Using the frame memory function, the unit can show 
noise-free slow-motion playback at speeds ranging from 0 
to 

1

/

2

 times normal speed in both directions.

When searching at speeds in the range +1 to +

1

/

30

* or 

−

1

/

30

 to 

−

1 times normal speed, the digital jog sound 

function is enabled. The audio signal is saved in temporary 
memory, and replayed according to the search speed. This 
allows searching on the sound track.

* The positive direction refers to forward movement of the tape, and the 

negative direction to reverse movement.

For analog video output and SDI-format video output, you 
can adjust the video output level, chroma signal output 
level, setup level (for DSR-1600), black level (for DSR-
1600P), and chroma phase.

The unit can perform automatic cyclical playback between 
two selected points on the tape.

You can choose a menu setting so that powering on the 
unit makes it immediately start playback.

The unit provides a menu system to make its various 
functions easier to use and set up its operation conditions.

Time code values, operation mode indications, error 
messages, and other text data can be superimposed and 
output in analog composite video signals.

Self-diagnostic/alarm function: This function 

automatically detects setup and connection errors, 
operation faults, and other problems. It also displays a 
description of the problem, its cause, and the 
recommended response on the video monitor screen or 
time counter display.

Digital hours meter: The digital hours meter functions 

include four kinds of tally operations for operating 
hours, head drum usage hours, tape transport hours, 
and tape threading/unthreading times. The tally results 
can be viewed on the video monitor or the time counter 
display.

The unit can play back aspect ratio information. When 
video accompanied by wide-screen aspect ratio 
information is played back, the unit can output the video 
signal also containing the aspect ratio information.

When you use the optional RMM-130 Rack Mount Kit, 
you can mount this unit onto an EIA-standard 19-inch rack 
(height = 4 units).

When installed in the unit, this optional board enables 
digital video and audio signals in the D1 format and also 
AES/EBU-format digital audio signals to be output from 
the unit to digital Betacam VCRs or other equipment.

This interface allows the unit to transfer video, audio and 
time code signals in SDTI (QSDI) format to the Sony 
EditStation at normal speed. When this unit is connected to 
another DVCAM VCR, it is possible to transfer 
compressed signals from this unit to the connected VCR.

This board allows you to connect the unit to other 
equipment provided with a Sony DV connector to carry 
out editing or dubbing of digital video and audio signals.

This kit can be used to mount the unit onto an EIA-
standard 19-inch rack.